<font id="17llp"><noframes id="17llp"><delect id="17llp"></delect>

        <big id="17llp"></big><font id="17llp"><address id="17llp"><del id="17llp"></del></address></font>

                      <delect id="17llp"><address id="17llp"><output id="17llp"></output></address></delect>
                      <dfn id="17llp"></dfn>

                      變壓吸附制氮(Vacuum Desorption PSA Oxygen Plant)

                      概論:

                      我公司生產的PSAN制氮設備是在吸取國內外眾多生產廠家成功經驗的基礎上,采用國際先進的工藝流程和技術,利用本公司雄厚的技術優勢,經多年的研究、試驗、完善后推出的國內先進的空氣分離設備。
                      具有投資少;操作簡單、自動化程度高、運行可靠、維修保養周期長、運行費用低;單位能耗低;使用壽命長等優點。針對不同應用領域,可實現不同純度指標,并已實現系列化。


                      PSA Nitrogen Plant
                      Overview
                      Our PSAN nitrogen plant is the most advanced air separation plants through years of research, tests and perfection in China. Taking solid technology advantages of our company, the plant adopts the latest process and technology in the world and is developed on basis of successful experiences of many suppliers both inside and outside China.
                      It has the characteristics of less investment, simple operation, high automation level, reliable operation, long maintenance and overhaul cycle and low operation cost, low unit power consumption and long service life etc. Aiming on different application field, we can provide different purity index in series.

                      工藝流程簡介:

                      原料空氣經壓縮機增壓后,壓縮空氣進入空氣緩沖罐以減緩氣流的脈動,然后進入除油過濾器,把水珠、油霧除去。干凈壓縮空氣進入吸附器,空氣中的O2、H2O、CO2以及碳氫化合物被吸附劑吸附,同時獲得氮氣,吸附塔飽和后,自動切換,該吸附器減壓至大氣壓力再生。本設備設置2個吸附器交替使用,以連續獲得產品氮氣。設置氮氣儲罐以穩定供氣系統氣壓的穩定。

                      PSA Nitrogen Plant
                      PROCESS DESCRIPTION
                      The feed air, after being compressed by the compressor, will enter into the buffer tank to reduce the stream fluctuation, then passes through the filter to remove the moisture and oil mist. The dry and clean compressed air goes into the adsorber, oxygen, moisture and carbon dioxide and other hydrocarbons in the air will be adsorbed, nitrogen is obtained at the same time. The system will change over automatically after the adsorbent is saturated. Then this adsorber will be depressurized to the atmospheric pressure for regeneration. There are two adsorbers working alternatively to obtain product nitrogen continuously. A nitrogen storage tank is provided to stabilize the supply pressure.

                       

                      工藝流程示意圖(PROCESS FLOW SHEET:)


                      型號規格(Models & Specifications):

                      型號
                      Model

                      氮氣純度
                      N 2 Purity

                      氮氣輸出壓力
                      N2 Output Pressure
                      氮氣產量
                      Nm3/h
                      N2 Output
                      耗氣量
                      Nm3/h
                      Air Capacity Consumed
                      裝機功率
                      Km
                      Power
                      PSAN-150 98% 0.7MPa 150 360 38.58
                      PSAN-300 300 750 77.57
                      PSAN-500 500 1248 114.4
                      PSAN-600 600 1446 165.78
                      PSAN-800 800 2004 206.51
                      PSAN-1000 1000 2502 258.62
                      PSAN-1500 1500 3750 373.6
                      PSAN-2000 2000 4998 520.8
                      PSAN-2500 2500 6246 571.5
                      PSAN-3000 3000 7500 672

                       

                      型號
                      Model

                      氮氣純度
                      N 2 Purity

                      氮氣輸出壓力
                      N2 Output Pressure
                      氮氣產量
                      Nm3/h
                      N2 Output
                      耗氣量
                      Nm3/h
                      Air Capacity Consumed
                      裝機功率
                      Km
                      Power
                      PSAN-150 99% 0.7MPa 150 423 38.58
                      PSAN-300 300 846 78.1
                      PSAN-500 500 1410 137.78
                      PSAN-800 800 2256 258.62
                      PSAN-1000 1000 2820 326.6
                      PSAN-1500 1500 4230 420.8
                      PSAN-2000 2000 5640 521.5
                      PSAN-2500 2500 7050 672
                      PSAN-3000 3000 8460 836

                       

                      型號
                      Model

                      氮氣純度
                      N 2 Purity

                      氮氣輸出壓力
                      N2 Output Pressure
                      氮氣產量
                      Nm3/h
                      N2 Output
                      耗氣量
                      Nm3/h
                      Air Capacity Consumed
                      裝機功率
                      Km
                      Power
                      PSAN-150 99.9% 0.7MPa 150 468 46.94
                      PSAN-300 300 930 93.1
                      PSAN-500 500 1560 165.78
                      PSAN-800 800 2496 258.62
                      PSAN-1000 1000 3120 326.6
                      PSAN-1500 1500 4680 420.8
                      PSAN-2000 2000 6276 621.5
                      PSAN-2500 2500 7800 786
                      PSAN-3000 3000 9300 936

                      通用條件:
                      電力:低壓電源:3相
                      冷卻水:溫度≤32℃
                      安裝場地:室內非防爆地區,環境溫度5~35℃


                      Utilities:
                      Power: LT power supply: 3-phase
                      Cooling Water: Temperature ≤32℃
                      Installation Area: Non Explosion-proof Area

                       

                      特點
                      設備簡單,造價低;
                      自動化程度高,操作簡單;
                      動力少、節能、制氮成本低;
                      運動件、易損件少,安全可靠,維修少;
                      啟動時間短,氣量穩定,停、用方便;
                      占地面積少、無污染;
                      操作范圍廣,變工況容易。


                      Features:
                      Simple Equipment, low cost
                      High automation level, easy operation
                      Less power consumption, energy saving & low cost of nitrogen product
                      Less movable parts and easily-damaged parts, safe, reliable and less maintenance
                      Short start-up time, steady flow, convenient shut-down & operation
                      Less area taken, free of pollution
                      Wide operation scope, easy load variation

                       

                      應用領域:APPLICATION FIELD

                      化學、化工工業
                      Chemical Industry
                      存貯液體上面大氣層的惰性化;吹洗容器、管道、反應器和隔離室;合成纖維紡線、拉絲防氯化;設備防腐;涂料顏色生產中充氮;防止油干燥時的聚合作用;對油船提供保護氣體;海洋工程的惰性氣體供應;橡膠生產中的包裝和氣氛保護。
                      Deactivation above the stored liquid; clean vessel, pipeline, reactor and isolation chamber; anti-chloride of synthetic fiber & spinning; anti-corrosion, nitrogen purging in the coating production line, prevention from polymerization of oil, protection gas for oil tanker; inert gas for ocean engineering; packing and protection gas in rubber production
                      煤炭開采
                      Coal Mining

                      向采空區氧化帶內或火區內注入一定流量的氮氣,使其氧含量降到10%或3%以下,起到防火、滅火和抑制瓦斯爆炸作用。
                      Inject a certain amount of nitrogen gas to the goaf or fired area to reduce the oxygen content to less than 10% or 3% for fire-fighting, fire-proof and inhibition of gas explosion

                      冶金和金屬加工工業
                      Metallurgical & Metal Machining Industry
                      熔煉爐和吹洗;容器和管道的泄漏檢驗和密封檢驗;鐵鑄造、鋁鑄造、鋁冶煉、粉末冶金燒結和金屬熱處理的氣氛保護。
                      Purging of melting furnace, leak test and air tight test for vessels and pipelines, iron casting, aluminum casting, aluminum refinery, powder metallurgy sintering and protection gas for heat treatment
                      玻璃、塑料工業
                      Glass & Plastic Industry

                      浮法玻璃生產中的氣體保護;塑料生產的防氧化;氣動傳輸。
                      Protection gas for float glass production, anti-oxidization in plastic production and pneumatic transfer
                      醫學、科學研究
                      Medical & Scientific Research

                      中草藥的常溫貯藏及抑治害蟲。生物防腐;材料檢驗;科研實驗。制藥原料;藥物的充氮包裝;運輸及保護。
                      Ambient storage of Chinese herbal medicine and pest & insects control; Biological anti-septic: material inspection & scientific experiment; Pharmaceutical materials: nitrogen filling for medicine package, transportation and protection
                      電子工業
                      Electronic Industry
                      灌充斷路器和電壓導體;制造半導體和電器用保護氣體;激光打孔等電氣元件氮氣氛。
                      Filling circuit breaker and conductor; protection gas for semi-conductor and electric appliance
                      食品、水果
                      Food & Fruits

                      食品包裝用保護氣體;酒、啤酒、果汁的貯存與保鮮;糧油食品、茶葉等的常溫貯存及抑治害蟲;水果、蔬菜在適宜溫度長期保鮮;氣調冷庫的氣調氣。
                      Protection gas for food package, storage and keep fresh for liquor, beer, juice, foodstuff, oil and tea and pest control; long-term preservation of fruits and vegetables; CA gas for CA cold stores
                      国产亚洲日本精品无码,私人情侣影院,欧美最猛性XXXXX大叫,香港三日本三级少妇三级孕妇 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>